HP Comware 5 Debug Manual Vol 1

*0.92311078 Sysname RM/6/RMDEBUG:
BGP NSR: Prifex 1.1.1.1 Mask 32 is found in the synchronization message.
*0.92311078 Sysname RM/6/RMDEBUG:
BGP NSR: Batch backup of NSR data starts.
*0.92311078 Sysname RM/6/RMDEBUG:
BGP NSR: Batch backup of Neighbor routes received from neighbors starts.
*0.92311078 Sysname RM/6/RMDEBUG:
BGP NSR: Batch backup of Neighbor routes is complete.
*0.92311078 Sysname RM/6/RMDEBUG:
BGP NSR: Packet with length 50 is expected from socket 1, but the received packet length
is 50.
*0.92311078 Sysname RM/6/RMDEBUG:
BGP NSR:
Timestamp is wrong in the ACK packet.
*0.92311078 Sysname RM/6/RMDEBUG:
BGP NSR: Session isn't found in ACK packet.
*0.92311078 Sysname RM/6/RMDEBUG:
BGP NSR: NSR smooth starts.
debugging bgp timer
Use debugging bgp timer to enable BGP timer debugging.
Use undo debugging bgp timer to disable BGP timer debugging.
Syntax
debugging bgp [ ipv4-address | ipv6-address ] timer
undo debugging bgp [ ipv4-address | ipv6-address ] timer
Default
BGP timer debugging is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
ipv4-address: Specifies the IPv4 address of a peer.
ipv6-address: Specifies the IPv6 address of a peer.
188