HP Comware 5 Debug Manual Vol 1

*Sep 4 16:08:37:272 2006 Sysname RM/6/RMDEBUG:
BGP.: Recv UPDATE from 11.1.1.2 with following destinations :
Update message length : 56
Local Pref : 100
MED : 0
Origin : Incomplete
AS Path :
Next Hop : 11.1.1.2
2.2.2.2/32,
*Sep 4 16:08:37:304 2006 Sysname RM/6/RMDEBUG:
BGP.: Recv UPDATE from 11.1.1.2 with following destinations :
Update message length : 55
Local Pref : 100
MED : 0
Origin : Incomplete
AS Path :
Next Hop : 11.1.1.2
11.1.1.0/24,
*Sep 4 16:08:37:304 2006 Sysname RM/6/RMDEBUG:
BGP.: Recv UPDATE from 11.1.1.2 with following destinations :
Update message length : 56
Local Pref : 100
MED : 0
Origin : Incomplete
AS Path :
Next Hop : 11.1.1.2
11.1.1.1/32,
// Update messages of IPv4 address family were displayed.
debugging bgp update ipv6
Use debugging bgp update ipv6 to enable debugging for IPv6 BGP Update messages.
Use undo debugging bgp update ipv6 to disable debugging for IPv6 BGP Update messages.
Syntax
debugging bgp update ipv6 [ peer { ipv6-address | ipv6-group-name } | ipv6-prefix ipv6-prefix-name ]
[ receive | send ] [ verbose ]
undo debugging bgp update ipv6 [ peer { ipv6-address | ipv6-group-name } | ipv6-prefix
ipv6-prefix-name ] [ receive | send ] [ verbose ]
Default
Debugging for IPv6 BGP Update messages is disabled.
Views
User view
192