HP Comware 5 Debug Manual Vol 1

Origin : Incomplete
AS Path :
Next Hop : 100::2
22::22/128,
*Sep 4 16:17:20:708 2006 Sysname RM/6/RMDEBUG:
BGP_IPV6.: Recv UPDATE from peer 100::2 with following destinations :
Update message length : 78
Local Pref : 100
MED : 0
Origin : Incomplete
AS Path :
Next Hop : 100::2
100::/64,
// Update messages of IPv6 address family were displayed.
debugging bgp update ipv6 vpn-instance
Use debugging bgp update ipv6 vpn-instance to enable debugging for IPv6 BGP Update messages of
the specified VPN instance.
Use the undo debugging bgp update ipv6 instance command to disable debugging for IPv6 BGP
Update messages of the specified VPN instance.
Syntax
debugging bgp update ipv6 vpn-instance vpn-instance-name [ ipv6-prefix ipv6-prefix-name | peer
ipv6-address ] [ receive | send ] [ verbose ]
undo debugging bgp ipv6 update vpn-instance vpn-instance-name [ ipv6-prefix ipv6-prefix-name |
peer ipv6-address ] [ receive | send ] [ verbose ]
Default
Debugging for IPv6 BGP Update messages of the specified VPN instance is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
vpn-instance-name: Specifies an MPLS L3VPN instance. The vpn-instance-name argument is a
case-sensitive string of 1 to 31 characters.
ipv6-prefix ipv6-prefix-name: Filters the output message debugging information with the specified IP
prefix list.
peer ipv6-address: Specifies BGP IPv6 update debugging for the specified IPv6 peer/peer group.
receive: Specifies debugging for received BGP packets.
send: Specifies debugging for sent BGP packets.
verbose: Displays detailed debugging information.
194