HP Comware 5 Debug Manual Vol 1

Field
Description
Send DLSw packet on set failed,error description
An error occurred during packet delivery within the
specified transparent bridge set. The error is of one of
the following types:
• Null packet.
• The specified bridge set ID is invalid.
• The specified bridge set is not enabled.
• The bridge set contains no DLSw virtual interface.
• Some interfaces in the bridge set are invalid.
• Some interfaces in the bridge set are not Ethernet
interfaces.
• VLAN processing failed when the outgoing
interface was an Ethernet interface.
Send DLSw packet on interface failed,error
description
An error occurred during packet delivery on the
specified outgoing interface. The error is of one of the
following types:
• Null packet.
• The specified outgoing interface does not exist.
• The specified outgoing interface is not an Ethernet
interface.
• Transparent bridging is not enabled on the device.
• Invalid transparent bridge set data block
associated with the interface.
• The specified outgoing interface is not in the bridge
set.
• The bridge set contains no DLSw virtual interface.
• VLAN processing failed when the outgoing
interface was an Ethernet interface.
Clear DLSw circuit with set failed,error description
An error occurred during deletion of all DLSw virtual
interfaces associated with the specified transparent
bridge set. The error is of one of the following types:
• The specified bridge set ID is invalid.
•
The specified bridge set is not enabled.
debugging bridge eth-forwarding
Use debugging bridge eth-forwarding to enable debugging for transparent bridging forwarding.
Use undo debugging bridge eth-forwarding to disable debugging for transparent bridging forwarding.
Syntax
debugging bridge eth-forwarding [ dlsw | interface interface-type interface-number ]
undo debugging bridge eth-forwarding [ dlsw | interface interface-type interface-number ]
Default
Debugging for transparent bridging forwarding is disabled.
Views
User view
207