HP Comware 5 Debug Manual Vol 1

// BRIDGE received a ping packet on Ethernet 1/2 and forwarded the ping packet to Ethernet 1/3.
*0.63325963 Sysname BRIDGE/7/DEBUGGING:
Forward a frame; received from interface Ethernet1/3;and try to send to interface
Ethernet1/2, with following frame head :
00 0f e2 00 00 21 00 e0 fc 3a 5f 07 08 00
// BRIDGE received a ping reply packet on Ethernet 1/3 and forwarded the ping replay packet to
Ethernet 1/2.
debugging bridge event
Use debugging bridge event to enable debugging for transparent bridging events.
Use undo debugging bridge event to disable debugging for transparent bridging events.
Syntax
debugging bridge event
undo debugging bridge event
Default
Debugging for transparent bridging events is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Table 107 describes output fields and messages for the debugging bridge event command.
Table 107 Output from the debugging bridge event command
Field
Description
TB module inactive,process PASS
Transparent bridging is not enabled on the device.
Packets received on Ethernet interfaces cannot be
forwarded through transparent bridging. They
undergo other types of forwarding or are passed to
upper application protocols.
Packet is being handled by TB intercepter
Transparent bridging is enabled on the device. A
further decision will be made about whether packets
received on Ethernet interfaces need to be forwarded
through transparent bridging.
00.e0.fc.3a.5f.07.00.0f.e2.00.00.21.08.00.45.00
.00.54.00.2b.00.00.ff.01.b7
The first 25 bytes of the packet to be processed.
TB_Receive process,from %s The incoming interface of the packet to be processed.
Input packet tag:%d VLAN tag of the packet, if any.
Search sub-interface finished
Failed to find the Ethernet sub-interface corresponding
to the VLAN tag carried in the packet.
209