HP Comware 5 Debug Manual Vol 1
Table 109 describes output fields and messages for the debugging voice ss cb event command.
Table 109 Output from the debugging voice ss cb event command
Field
Description
Receive CMC_RELEASE message from SA module.
A CMC_RELEASE message was received from the SA
module.
T a b l e 11 0 describes output fields and messages for the debugging voice ss cb info command.
Table 110 Output from the debugging voice ss cb info command
Field
Description
Send setup message to SPL module A SETUP message was sent to the SPL module.
Receive message from in leg. A message was received from the input call leg.
Can not get the new entity. Call backup failed to get the index of a new entity.
Can not find the new entity. Call backup failed to find an available entity.
T a b l e 111 describes output fields and messages for the debugging voice ss cb timer command.
Table 111 Output from the debugging voice ss cb timer command
Field
Description
Timer deleted, Timer ID:
TIMER_INLEG_WAIT_ALERTING.
The INLEG_WAIT_ALERTING timer was deleted.
Examples
# Enable all types of debugging for call backup on the router. Output similar to the following example
is generated when a telephone (1000) attempts to call the number 3000 under these conditions:
•
The router (192.168.0.31) has two voice entities (3000 and 3001) to reach the telephone number
3000:
Entity 3000 has a priority of 1, and its destination IP address is 192.168.0.38.
Entity 3001 has a priority of 3, and its destination IP address is 192.168.0.32.
•
The gateway at 192.168.0.38 fails.
<RouterA> debug voice ss cb all
SS CB all debugging switches are on
<RouterA>
// Router A found voice entity 3000 to originate a call according to the dial plan.
// The gateway at 192.168.0.38 failed to respond, and the call was transferred to the call backup
module for processing.
*Nov 14 08:18:11:37 2005 RouterA SS/7/VOICE:
CB_EVT: [0x00030001] Receive CMC_RELEASE message from SA module.
// A RELEASE message was received.
*Nov 14 08:18:11:38 2005 RouterA SS/7/VOICE:
214