HP Comware 5 Debug Manual Vol 1

CB_INFO: [0x00030001] The CMC_RELEASE message's release cause: Wait alerting message
timeout
// The cause for the RELEASE message was checked.
*Nov 14 08:18:11:38 2005 RouterA SS/7/VOICE:
CB_TMR: [0x00030000] Timer deleted, Timer ID: TIMER_INLEG_WAIT_ALERTING.
// A call was ready to be re-originated, and the INLEG_WAIT_ALERTING timer was restarted.
*Nov 14 08:18:11:38 2005 RouterA SS/7/VOICE:
CB_INFO: [0x00030000] Send CMC_SETUP message to start a new call.
// A call was re-originated to voice entity 3001, which corresponds to the backup gateway at
192.168.0.32.
debugging voice ss cf
Use debugging voice ss cf to enable call forwarding debugging.
Use undo debugging voice ss cf to disable call forwarding debugging.
Syntax
debugging voice ss cf { all | error | event | fsm | info | timer }
undo debugging voice ss cf { all | error | event | fsm | info | timer }
Default
Call forwarding debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
all: Specifies all types of debugging for call forwarding.
error: Specifies error debugging.
event: Specifies event debugging.
fsm: Specifies finite state machine debugging.
info: Specifies information debugging.
timer: Specifies timer debugging.
Usage guidelines
T a b l e 112 describes output fields and messages for the debugging voice ss cf error command.
Table 112 Output from the debugging voice ss cf error command
Field
Description
The leg is null on CFR idle state
The input leg was null in the call forwarding recipient
(CFR) idle state. This information is output when the input
leg is incorrect.
215