HP Comware 5 Debug Manual Vol 1

Field
Description
The message is null on CFR idle state
The input message was null in the CFR idle state. This
information is output when the input message is incorrect.
The service handle notify is null on CFR idle state
The input service handle notify was null in the CFR idle
state. This information is output when the input service
handle notify is incorrect.
The CCB is null on CFR idle state
The input CCB was null in the CFR idle state. This
information is output when the input CCB is incorrect.
The message set type is null on CFR idle state
The input message set type was null in the CFR idle state.
This information is output when the input message set type
is incorrect.
The message type is null on CFR idle state
The input message type was null in the CFR idle state. This
information is output when the input message type is
incorrect.
Receive error message from SA module on CFR
idle state
The CFR received an incorrect message from the SA
module. This information is output when different finite
state machines receive any incorrect message.
Receive error service message from SA module on
CFR idle state
The CFR received an incorrect service message from the
SA module. This information is output when different finite
state machines receive any incorrect service message.
Failed to get brother leg on CFR idle state
The CFR in the idle state failed to get a brother leg. This
information is output when any error occurs in getting a
brother leg.
Input leg is wrong in CFR idle state
The input leg of the CFR was incorrect. This information is
output in different states when the type or ID of the input
leg is incorrect.
Failed to disconnect media in CFR idle
The media failed to be disconnected in the CFR idle state.
This information is output when different finite state
machines fail to disconnect the media.
Failed to delete CCB on CFR idle state
The CCB failed to be deleted in the CFR idle state. This
information is output when different finite state machines
fail to delete the CCB.
Failed to setup all new call on CFR idle state.
Will release the service call
The CFR failed to set up a new call, and the call was
cleared.
Failed to get new call number on CFR idle state
The CFR failed to obtain a new call number in the idle
state.
Input leg is wrong or get brother leg fail on CFR
pending state
The input leg was incorrect or getting a brother leg in the
CFR pending state. This information is output in different
states when the type or ID of the input leg is incorrect.
Failed to setup new call by all numbers on CFR
pending state
The CFR in the pending state failed to set up a new call
using all numbers. This information is output when the CFR
in the pending state fails to set up a new call using all
numbers.
The leg is invalid on CFR pending state The input leg of the CFR was invalid in the idle state.
The CMC CCB is null on CFO idle state
The input CMC CCB was null. This information is output
when the CMC CCB was null in different states.
216