HP Comware 5 Debug Manual Vol 1

Field
Description
Leg's father CCB is null in recording setup's
information process
The father CCB of the leg was found to be null in the
special processing of the SETUP message.
Input parameter is null in predicting CF service
process
The call number was found to be null in predicting the CF
service.
Dial peer is null in predicting process
The dial peer was found to be null in predicting the CF
service.
The input is null in matching voice entity process
The input leg or number was found to be null in processing
CF information.
The CMC CCB is null in finding voice entity by
forward information process
The CMC CCB was found to be null in processing CF
information.
The FEATURE service failed to obtain call
information table in finding voice entity by
forward information process
Call forwarding failed to obtain the call information table
in processing CF information.
The FEATURE service failed to obtain service
configuration in creating CF register table
process.
Call forwarding failed to obtain the service configuration
in creating a CF registration table.
Redirect exceed the max limit and release the new
call in interface process
The number of redirections exceeded the limit, and the call
was released in interface processing.
Could not setup new call in interface process
Call forwarding failed to re-originate a call in interface
processing.
Failed to create CF CCB in interface process
Call forwarding failed to create a CCB. This information is
output when a CCB fails to be created.
Has zero addresses in message in interface
process
No forwarded-to number was received in interface
processing.
Receiver's state is error in interface process The CFR's state was incorrect in interface processing.
Could not judge CF role in interface process The CF role could not be judged in interface processing.
Receive invalid message from SA Module in
interface process.
message set type: message type:
Invalid messages were received from the SA module in
interface processing, and the message set type and the
message type were displayed.
CF originator's state is Error in interface process The CFO's state was incorrect in interface processing.
Table 113 describes output fields and messages for the debugging voice ss cf event command.
Table 113 Output from the debugging voice ss cf event command
Field
Description
Send CMC_SERVICE_ACK message to CMC
module in CFR Idle state
The CFR in the idle state sent a CMC_SERVICE_ACK
message to the CMC module.
Send CMC_SERVICE_ACK message to CMC
module
The CFR sent a CMC_SERVICE_ACK message to the CMC
module.
Send CMC_SETUP message to CMC module in
CFO unsupported process state
The CFO in local processing state sent a CMC_SETUP
message to the CMC module.
Send CMC_RELEASE message to CMC module in
CFR Pending state
The CFR in the pending state sent a CMC_ RELEASE
message to the CMC module.
219