HP Comware 5 Debug Manual Vol 1

Field
Description
Send CMC_RELEASE message to CMC module in
CFO Idle state
The CFO in the idle state sent a CMC_ RELEASE message
to the CMC module.
Send CMC_RELEASE message to CMC module in
CFO wait service ack state
The CFO in the waiting-for-service-ack state sent a CMC_
RELEASE message to the CMC module.
Send CMC_RELEASE message to CMC module in
CF interface process state
A CMC_RELEASE message was sent to the CMC module
in CF interface processing.
Delete CF CCB successfully. The CF CCB was successfully deleted.
CMC setup was dismissed in CF CMC setup
special process
The CMC_SETUP message disappeared after special
processing by the CF CMC module.
Receive CMC_SERVICE message from SA module
CMC_SERVICE message include the following
information:
Original flag:, count:, cause:
Redirection flag:, count:, cause:
A CMC_SERVICE message was received from the SA
module, and the message included the following
information:
Original flag, original count, and original cause:
Redirect flag, redirect count, and redirect cause:
T a b l e 114 describes output fields and messages for the debugging voice ss cf fsm command.
Table 114 Output from the debugging voice ss cf fsm command
Field
Description
State changed from CFR idle to CFR pending The state of the CFR changed from idle to pending.
CFR state changed from pending to idle The state of the CFR changed from pending to idle.
CFO state changed from idle to waiting release
The state of the CFO changed from idle to
waiting-for-release.
CFO state changed from waiting release to
waiting service ack
The state of the CFO changed from waiting-for-release to
waiting-for-service-ack.
T a b l e 115 describes output fields and messages for the debugging voice ss cf info command.
Table 115 Output from the debugging voice ss cf info command
Field
Description
Send Last number successfully on CFR idle state The CFR sent the last number successfully.
Send setup message successfully on CFR pending
state
The CFR sent a SETUP message successfully.
Receive normal onhook message on CFR pending
state
The CFR received a normal hook message in the pending
state.
Send setup message successfully on CFR pending
state
The CFR successfully sent a SETUP message in the pending
state.
Setup message information in CFO idle state:
Original flag:, Original count:, Original cause:
Redirect flag:,Redirect count, Redirect cause:
The CFO sent a SETUP message in the idle state.
Original flag, original count, and original cause:
Redirect flag, redirect count, and redirect cause:
CRI service enabled, release this call on CFO idle
state
Incoming call barring was enabled, and the CFO released
the call in the idle state.
220