HP Comware 5 Debug Manual Vol 1

Field
Description
Failed to find CFU voice entity in CFO idle state
The CFO failed to find a voice entity for CFU in the idle
state.
Find CFU voice entity successfully in CFO idle
state.
Caller number: Forwarding number :
The CFO found a voice entity for CFU in the idle state.
Calling number and called number:
Go to the unsupported process on CFO idle state The CFO in the idle state went into local processing.
Send service CFU successfully, state changed
from idle to waiting ack.
A CFU SERVICE message was successfully sent, and the
state changed from idle to wait-for-ack.
Registed CF service mismatched on CFO wait
release state
The RELEASE message received by the CFO in the
waiting-for-release state mismatched the registered CF
service.
Go to the unsupported process on CFO wait
release state.
The CFO in the waiting-for-release state went into the
processing of an unsupported condition.
Go to the unsupported process on CFO wait
service ack state
The CFO in the waiting-for-ack state went into the
processing of an unsupported condition.
Failed to process unsupported condition and
release call
Local processing failed, and the call was released.
Finish the unsupported process on CFO wait ack
state
The CFO in the waiting-for-ack state finished local
processing.
No Number to setup call in CFR service process The CFR had no number to continue call origination.
CFR has setup a new call in CFR service process The CFR already originated a new call.
Failed to setup new call by all numbers in CFR
service process
Call forwarding failed to originate a call after trying all
numbers in multi-address processing.
No number to setup call in CFR fail message
process
The CFR had no number to continue to originate a new call
when receiving a FAIL message.
CFR has setup a new call in CFR fail message
process
The CFR already originated a new call when receiving a
FAIL message.
Failed to setup new call by all numbers in CFR fail
message process
The CFR failed to set up a new call using all numbers after
receiving a FAIL message.
Has same number in adding new address process
The number already existed when a new address was
added.
Add the number successfully in adding new
address process
A number was successfully added.
CF address table is full in adding new address
process
The forwarded-to number list was already full when a new
address was added.
Setup new call in CFR module:
New called number:
caller number:
called IP:
called ifindex:
Original flag:, count:
Redirect flag:, count:,
The CFR originated a new call.
New called number:
Called number:
IP address of the terminating gateway:
Index of the called subscriber line:
Original flag and original count:
Redirect flag and redirect count:
221