HP Comware 5 Debug Manual Vol 1

Field
Description
MCH CCB is initialized successfully. The MCH CCB was successfully initialized.
MCH CCB is deleted successfully. The MCH CCB was successfully deleted.
The hookflash is counted successfully. The hookflash was successfully cached.
The current state is XXX. The current state of the MCH service is xxx.
Ta b l e 121 describes output fields and messages for the debugging voice ss ch timer command.
Table 121 Output from the debugging voice ss ch timer command
Field
Description
Timer created, TimerId : XXX, Timer length :XXX."
The xxx timer with a length of xxx seconds
was successfully created.
Timer deleted, TimerId : XXX. The xxx timer was deleted.
Timer timeout, TimerId : XXX. The xxx timer expired.
Examples
# Enable all types of debugging for call hold on Router A. The output similar to the following example
was created when the following conditions exist:
•
Call hold is enabled for both the calling party attached to Router A and called party attached to
Router B.
•
A call is established from Telephone A to Telephone B, and then the calling party (Telephone A)
places the call on hold by pressing hookflash.
The output similar to the following messages was created when all types of debugging for call hold are
enabled on Router A.
<RouterA> debugging voice ss ch all
SS CH all debugging switches are on
<RouterA>
*Nov 20 00:38:37:850 2005 RouterA SS/7/VOICE:
CH_EVT: [0x00000000] CH Service Interface received message [CMC_INFORMATION] from SPL
[SPL_DISCRIM_LGS].
// A CMC_INFORMATION (HOOKFLASH) message was received.
*Nov 20 00:38:37:851 2005 RouterA SS/7/VOICE:
CH_INFO: [0x00000000] Start a new CH service successfully.
// The call hold service was successfully started.
*Nov 20 00:38:37:851 2005 RouterA SS/7/VOICE:
CH_EVT: [0x00000000] Received message:[CMC_INFORMATION] in state[S_CH_IDLE].
// The call hold module processed the CMC_INFORMATION (HOOKFLASH) message in the idle state.
*Nov 20 00:38:37:851 2005 RouterA SS/7/VOICE:
CH_TMR: [0x00000000] Timer created, Timer ID: TIME_LEN_SS_CH_WAIT_SRVACK, Timer length:
20000.
// A 20000-ms timer waiting for a call hold acknowledgment was created.
234