HP Comware 5 Debug Manual Vol 1

Views
User view
Default command level
1: Monitor level
Parameters
packet: Specifies debugging for packets.
acl acl-number: Specifies the ACL for matching RADIUS packets to be used for debugging. The
acl-number argument is in the range 2000 to 3999. If this argument is configured multiple times, the most
recent setting takes effect. Only the source IP address information in the ACL rules is used for matching
packets.
user username: Specifies the username string for matching online users' usernames. The user-name
argument is a case-sensitive string of 1 to 80 characters.
slot slot-number: Specifies debugging for the card in a slot by the slot number. (Distributed devices.)
slot slot-number: Specifies debugging for a centralized IRF member device. The slot-number argument
represents the member ID of the device. (Centralized IRF devices.)
chassis chassis-number slot slot-number: Specifies debugging for a card in an IRF member device. The
chassis-number argument is the ID of a member device of the current IRF fabric. The slot-number
argument specifies the slot number of the card. (Distributed IRF devices.)
Usage guidelines
Table 8 describes output fields and messages for the debugging radius packet command.
Table 8 Output from the debugging radius packet command
Field
Description
Recv MSG RADIUS received a message.
MsgType = msg type Type of the received message.
Index = index User index.
ulParam3 = address Address carried in the message.
Send attribute list Attribute list of the packet.
User-name Username.
Password User password.
Service-Type Authentication service type for access users.
Framed-Protocol Link layer protocol.
Framed-Address Network address of user assigned by NAS.
NAS-Startup-Timestamp Duration from NAS startup to current time.
RetryTimes = [retry-number] Number of transmission attempts.
22