HP Comware 5 Debug Manual Vol 1
*May 18 10:42:05:879 2007 RouterB SS/7/VOICE:
CH_TMR: [0x00060000] Timer deleted, Timer ID: TIMER_SS_CH_WAIT_MAXHOLDED.
// The timer for the held party to wait was deleted.
*May 18 10:42:05:879 2007 RouterB SS/7/VOICE:
CH_INFO: [0x00060000] CH service is finished at cause [E_CH_OK].
// The call was resumed successfully, and the call hold service ended.
debugging voice ss conf
Use debugging voice ss conf to enable three-party conference debugging.
Use undo debugging voice ss conf to disable three-party conference debugging.
Syntax
debugging voice ss conf { all | error | event | fsm | info | timer }
undo debugging voice ss conf { all | error | event | fsm | info | timer }
Default
Three-party conference debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
all: Specifies all types of debugging for three-party conference.
error: Specifies error debugging.
event: Specifies event debugging.
fsm: Specifies finite state machine debugging.
info: Specifies information debugging.
timer: Specifies timer debugging.
Usage guidelines
Tab l e 122 describes output fields and messages for the debugging voice ss conf fsm command.
Table 122 Output from the debugging voice ss conf fsm command
Field
Description
Conference state move from %s to [xxx]. Conference state changed from xxx state to xxx state.
Examples
# Enable all types of debugging for three-party conferencing on Router B. Output similar to the following
example is generated when the user at Telephone B presses "3" to enter a three-party conference under
these conditions:
240