HP Comware 5 Debug Manual Vol 1

undo debugging voice ss cr { all | error | info }
Default
Call barring debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
all: Specifies all types of debugging for call barring.
error: Specifies error debugging.
info: Specifies information debugging.
Usage guidelines
Tab l e 123 describes output fields and messages for the debugging voice ss cr error command.
Table 123 Output from the debugging voice ss cr error command
Field
Description
The leg is null in CR analyse process. The leg was null in call barring analysis.
Ta b l e 124 describes output fields and messages for the debugging voice ss cr info command.
Table 124 Output from the debugging voice ss cr info command
Field
Description
PS type leg, Dial-out restriction service has been enabled
in IP caller.
Outgoing call barring was enabled for the IP caller.
PS type leg, Dial-out restriction service has been
disabled in IP caller.
Outgoing call barring was disabled for the IP caller.
PS type leg, No CR config in CR analyse process in IP
caller.
Call barring configuration of the IP caller was
unavailable.
CS type leg, Dial-in restriction service has been enabled
in IP callee.
Incoming call barring was enabled for the IP callee.
CS type leg, Dial-in restriction service has been disabled
in IP callee.
Incoming call barring was disabled for the IP callee.
CS type leg, No CR config in CR analyse process in IP
callee.
Call barring configuration of the IP callee was
unavailable.
Dial-out restriction service has been enabled in local
caller.
Outgoing call barring was enabled for the local
caller.
Dial-out restriction service has been disabled in local
caller.
Outgoing call barring was disabled for the local
caller.
No CR config in CR analyse process in local callee.
Call barring configuration of the local callee was
unavailable.
Dial-in restriction service has been enabled in local
callee.
Incoming call barring was enabled for the local
callee.
243