HP Comware 5 Debug Manual Vol 1

Field
Description
Dial-in restriction service has been disabled in local
callee.
Incoming call barring was disabled for the local
callee.
No CR config in CR analyse process in local caller.
Call barring configuration of the local caller was
unavailable.
Examples
# Enable all types of debugging for call barring on Router A. Call barring is enabled for Telephone A.
Output similar to the following example is generated when Telephone B attached to Router B calls
Telephone A attached to Router A:
<RouterA> debugging voice ss cr all
SS CR all debugging switches are on
<RouterA>
*Nov 20 02:07:05:59 2005 RouterA SS/7/VOICE:
CR_INFO: [0x00050001] CS type leg, Dial-in restriction service has been enabled in IP
callee.
// Incoming call barring was enabled, and call termination failed.
# Enable all types of debugging for call barring on Router A. Call barring is enabled for Telephone B.
Output similar to the following example is generated when Telephone A attached to Router B calls
Telephone B attached to Router A:
<RouterA> debugging voice ss cr all
SS CR all debugging switches are on
<RouterA>
*Nov 20 02:20:36:715 2005 RouterA SS/7/VOICE:
CR_INFO: [0x00060001] PS type leg, Dial-out restriction service has been enabled in IP
caller.
// Outgoing call barring was enabled, and call origination failed.
debugging voice ss ct
Use debugging voice ss ct to enable call transfer debugging.
Use undo debugging voice ss ct to disable call transfer debugging.
Syntax
debugging voice ss ct { all | error | event | fsm | info | timer }
undo debugging voice ss ct { all | error | event | fsm | info | timer }
Default
Call transfer debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
all: Specifies all types of debugging for call transfer.
244