HP Comware 5 Debug Manual Vol 1

error: Specifies error debugging.
event: Specifies event debugging.
fsm: Specifies finite state machine debugging.
info: Specifies information debugging.
timer: Specifies timer debugging.
Usage guidelines
Ta b l e 125 describes output fields and messages for the debugging voice ss ct error command.
Table 125 Output from the debugging voice ss ct error command
Field
Description
Failed to find CMC ccb in CTO
interface
Call transfer failed to f
ind a CMC CCB in the call transfer originator
(CTO) interface.
Similar debugging information includes:
• Failed to find XXX in SSS.
• Failed to get XXX in SSS.
• Failed to send XXX in SSS.
• Failed to create XXX in SSS.
• Failed to restore XXX in SSS.
• Failed to play XXX tone in SSS.
• Failed to stop XXX tone in SSS.
• Failed to recover XXX in SSS.
All this information indicates that an operation (represented by xxx)
failed. SSS following the preposition "in" (or sometimes the
conjunction "when") indicates the place or time that the operation
failed.
Geting first voice entity when find
entity in CT
Call transfer failed to obtain the first voice entity in the CT service.
Similar debugging information is in the following format:
The FEATURE service failed to obtain xxx failed (when TTT) in SSS.
This indicates that an operation (represented by xxx) failed. TTT
indicates the time that the operation failed. SSS indicates the place
where the operation failed.
The source of the message is invalid in
CTO interface
The received RELEASE message was not a local message, and the call
transfer service could not be triggered.
Received invalid release message in
CTO interface. Release cause is 3
The received RELEASE message was not an onhook message, and the
call transfer service could not be triggered.
The state of active leg is invalid in CTO
interface
The state of the active leg is incorrect, and the call transfer could not
be triggered.
The number 3 of talk path is invalid in
CTO interface
The number of the current talk paths was incorrect, and the call
transfer could not be triggered.
Received invalid cmc message in CTO
interface
The received message was not a RELEASE message, and the call
transfer service could not be triggered.
The state of CTO is invalid in CTO
interface. State = 3
The state of the CTO was incorrect.
245