HP Comware 5 Debug Manual Vol 1

Field
Description
Code = [code-number]
Packet type identified by the code number:
• 1—Access-request.
• 2—Access-accept.
• 3—Access-reject.
• 4—Accounting-request.
• 5—Accounting-response.
• 11—Access-challenge.
State
State information when CHAP authentication was operating
between the supplicant and server.
Termination-Action The NAS termination action after the service ended.
Remanent_Volume Remaining traffic that was allowed for the session.
Acct_Interim_Interval Real-time accounting interval.
Server_String Display information sent from the server to the supplicant.
Acct-Status-Type Accounting request status.
Acct-Authentic Authentication method.
Acct-Session-Id Accounting session ID.
AAAID AAA user resource ID.
Req-ID Request ID (authentication, authorization, or accounting request).
Error: Failed to get AAA-attr attribute
RADIUS failed to get AAA attributes.
The AAA attribute includes:
• AAA_AcctType—Accounting type.
• AAA_PortVlanID—Port VLAN ID.
• AAA_AuthType—Authentication type.
• AAA_DomainName—Domain name.
• AAA_MacAddr—MAC address.
Event: No AAA-attr available
No AAA attributes available.
The AAA attribute includes:
• AAA_IsStopAcctBufferSend Attribute—Whether or not the
stop-accounting packets are buffered.
• AAA_TerminateCause—Service termination cause.
Examples
# Enable RADIUS packet debugging. Output similar to the following example is generated when a user
initiates a portal authentication process through the IE browser under the following conditions:
•
Portal authentication is enabled on the device.
•
A RADIUS authentication scheme is configured for the user.
<Sysname> debugging radius packet
*Dec 6 15:36:38:956 2006 Sysname RDS/7/DEBUG:Recv MSG,[MsgType=Normal auth request Index
= 5, ulParam3=109364420]
// RADIUS received an authentication request with the user index 5 and address 109364420.
*Dec 6 15:36:38:956 2006 Sysname RDS/7/DEBUG:NAS name is too long, cannot send Connect_port
attribute
23