HP Comware 5 Debug Manual Vol 1

Field
Description
Send SERVICE(CT) message to CMC module
in S_CTO_IDLE state
The CTO in the idle state sent a SERVICE(CT) message to the
CMC module.
Similar debugging information is in the following format:
Send MMM message to FFF module (in SSS state)
This information indicates that the CTO in xxx state sent an
xxx message to the xxx module. MMM indicates the message
that was sent. FFF indicates the module to which the message
was sent. SSS (optional) indicates the state of the CTO when it
sent the message.
Table 127 describes output fields and messages for the debugging voice ss ct fsm command.
Table 127 Output from the debugging voice ss ct fsm command
Field
Description
State changed from S_CTR_IDLE to
S_CTR_SCWA
The service state of the CTR changed from idle to SCWA.
Similar debugging information is in the following format:
State changed from SSS to DSS.
This information indicates that the service state changed from
SSS to DSS. SSS indicates the initial service state, and DSS
indicates the target service state.
Tab l e 128 describes output fields and messages for the debugging voice ss ct info command.
Table 128 Output from the debugging voice ss ct info command
Field
Description
Ends service of CTO for invalid state in CTO
interface
The CT service ended because the service state of the current
CTO was invalid.
Ends service of CTR for invalid state in CTR
interface
The CT service ended because the service state of the current
CTR was invalid.
Release all calls and CT ends because of
general error in CTO interface
All calls were released, and the CT service ended because an
uncontrollable error occurred.
Release call with final-recipient because of
failure of timer creation
The call with the final recipient was released because the timer
waiting for the final recipient's release failed to be created.
CT ends because of no CMC ccb in CTO idle
status process
The CT service ended because there was no corresponding
CMC CCB in the CTO's idle state.
Similar debugging information is in the following format:
CT ends because of RRR in SSS.
This information indicates that the CT service ended for some
reason. RRR indicates the reason and SSS indicates the
position where an event happened.
Release all calls and CT ends
The CT service ended, and all calls related to the CMC CCB
were released.
The service_ack for CTO is fail in CTO's
WACK status process
The CTR was unable to process the SERVICE_CT message and
returned a failure acknowledgment.
248