HP Comware 5 Debug Manual Vol 1

Field
Description
Receive the recipient's release message at
BCT in CTO's WACK status process. Service
process ends
A RELEASE message was received from the CTR when the
CRO's WACK state was not notified of, and the CT service
ended.
Similar debugging information is in the following format:
Receive RRR's MMM message at TTT in SSS. (Service process
ends)
This information indicates that an event occurred after a
message was received from a role in the CT service. RRR
indicates a role in the CT service. MMM indicates the
message. TTT indicates a specific position, state, or point of
time. SSS indicates the position where an event happened.
The result can be attached at the end of the debugging
information.
There is only one talk at ACT in CTO's WACK
status process. Service process ends
There was only one talk in the CTO's WACK state, and the CT
service ended. Similar debugging information might also
appear in other states, except that the position where an event
happens is different.
There is not only one talk path in CTR's WREL
status process
There was more than one talk when a resume request was
received from the CTO, and the call could not be resumed.
Release call with final-recipient at ACT in
CTO's WACK status process
The call with the final recipient was released when the CTO's
WACK state was notified.
Similar debugging information is in the following format:
Release call with RRR at TTT in SSS.(Service ends)
This information indicates that the call with a role in the CT
service was released. RRR indicates a role in the CT service.
TTT indicates a specific position, state, or point of time. SSS
indicates the position where an event happened.
Supplementary description can be attached at the end of the
debugging information.
Release all calls in CTO's WACK status
process
All related calls were released in the CTO's WACK state.
Similar debugging information might also appear in other
states, except that the position where an event happened is
different.
Release all calls and service process ends
because of waiting service ACK message
timeout
Because of SERVICE_ACK timeout, the CT service ended, and
all related calls were released.
Similar debugging information might also appear for other
reasons, except that the reason for an event is different.
Delete the new call leg in building new setup
message to spl
The new call by the CTR failed, and the new call leg was
deleted.
The originator has released. Will not send
notify(alerting) in CTR's SCWA status process
Because the CTO released the call, no NOTIFY (ALERTING)
message was sent to it.
The originator has already released. Service
ends and return to normal call
Because the CTO released the call, no NOTIFY message was
sent. The CT service ended directly and returned to the normal
call state.
Service ends when the only one talk path been
released
Because the only talk path was released, the CT service
ended. Sometimes, the position where an event happened
might be attached at the end of "in SSS".
249