HP Comware 5 Debug Manual Vol 1

Field
Description
The original active leg is null. Service ends
The original active leg could not be found, and the CT service
ended.
Release CTR ccb and CT ends in CTR's WREL
status process
The service resources of the CTR were released.
Service ends after waiting originator's release
message timeout
Because a RELEASE message was not received from the CTO
within the specified time, the CT service ended and returned to
the normal call state.
Release the original call after success to
replace in CTT process for idle
The original call was released after replacement succeeded.
Similar debugging information is in the following format:
Release CCC (after TTT) in SSS.
This information indicates that a call was released. CCC
indicates a talk path in the CT service. TTT indicates a specific
position, state, or point of time. and SSS indicates the position
where an event happened.
Delete the new leg in CTT process for CW
The new call leg was released because replacement failed.
Similar debugging information might also appear in other
states, except that the position where an event happens is
different.
Ta b l e 129 describes output fields and messages for the debugging voice ss ct timer command.
Table 129 Output from the debugging voice ss ct timer command
Field
Description
Timer created, TimerId:
TIMER_SS_CTR_WAIT_CTO_REL, Timer
length : 100000
The SS_CTR_WAIT_CTO_REL timer was successfully created,
with a length of 100000 milliseconds.
Similar debugging information is in the following format:
Timer created, TimerId : DDD, Timer length : LLL.
This information indicates that the xxx timer with a length of
xxx milliseconds was successfully created. DDD indicates the
timer ID, and LLL indicates the timer length.
Timer deleted, TimerId :
TIMER_SS_CTR_WAIT_CTO_REL
The SS_CTR_WAIT_CTO_REL timer was successfully deleted.
Similar debugging information is in the following format:
Timer deleted, TimerId: DDD.
This information indicates that the xxx timer was successfully
deleted. DDD indicates the timer ID.
Timer timeout, TimerId :
TIMER_SS_CTR_WAIT_CTO_REL
The SS_CTR_WAIT_CTO_REL timer was successfully deleted.
Similar debugging information is in the following format:
Timer timeout, TimerId : DDD.
This information indicates that the xxx timer expired. DDD
indicates the timer ID.
Examples
Output similar to the following example is generated when the following conditions exist:
250