HP Comware 5 Debug Manual Vol 1

Field
Description
The leg is already invalid on CW penging state. The call leg was invalid in the pending state.
Failed to send connect message on CW penging
state.
The FEATURE service failed to send a CONNECT
message in the pending state.
Failed to create intsend alerting timer on CW pending
state.
The FEATURE service failed to create the ALERTING
timer in the pending state.
The leg may be deleted on CW penging state. The call leg was deleted in the pending state.
Received invalid RELEASE message on CW pre-idle
state.
An invalid RELEASE message was received in the
pre-idle state.
Received invalid SET message on CW WA state.
An invalid SET message was received in the
waiting-for-alerting state.
Failed to Delete Timer on CW MCH state.
The FEATURE service failed to delete the timer in the
multi-call hold state.
Failed to find active PSTN leg on CW MCH state.
The FEATURE service failed to find an active PSTN leg
in the multi-call hold state.
Failed to Get brother Call leg on CW MCH state.
The FEATURE service failed to obtain a brother leg in
the multi-call hold state.
Failed to create CW SRVCUHACK timer on CW
organiger state.
The FEATURE service failed to create the CW
SRVCUHACK timer in the S_CW_O state.
Received invalid CMC_SERVICE_ACK message on
CW organiger state.
An invalid CMC_SERVICE_ACK message was
received in the S_CW_O state.
Failed to stop busy tone when receiving service
ack(cuh) message on CW CUHPRE state
The FEATURE service failed to stop playing busy tones
in the S_CW_CUHPRE state after a SERVICE_ACK
(CUH) message was received.
Failed to stop playing call waiting signal tone.
The FEATURE service failed to stop playing call
waiting tones.
Failed to create CW PLAY_CALL_TONE timer in Play
CW Tone process.
The FEATURE service failed to create the CW
PLAY_CALL_TONE timer.
Ta b l e 131 describes output fields and messages for the debugging voice ss cw event command.
Table 131 Output from the debugging voice ss cw event command
Field
Description
Receive %s message from %s module. An xxx message was received from the xxx module.
Receive %s message from %s module in %s state.
An xxx message was received from the xxx module in
xxx state.
Ta b l e 132 describes output fields and messages for the debugging voice ss cw fsm command.
Table 132 Output from the debugging voice ss cw fsm command
Field
Description
State changed from %s to %s . The state changed from xxx to xxx.
Ta b l e 13 3 describes output fields and messages for the debugging voice ss cw info command.
257