HP Comware 5 Debug Manual Vol 1

*Nov 20 03:10:04:731 2005 RouterA SS/7/VOICE:
CW_TMR: [0x00090003] Timer created, Timer ID: TIMER_SS_CW_PLAY_SOUND_INTERVAL, Timer
length: 400.
*Nov 20 03:10:04:883 2005 AR30-40 SS/7/VOICE:
CW_EVT: [0x00090003] Receive TIMER_SS_CW_PLAY_SOUND_INTERVAL message from SA module.
*Nov 20 03:10:04:983 2005 RouterA SS/7/VOICE:
CW_EVT: [0x00090003] Receive TIMER_SS_CW_PLAY_SOUND_INTERVAL message from SA module in
PENGING state.
*Nov 20 03:10:05:195 2005 RouterA SS/7/VOICE:
CW_TMR: [0x00090003] Timer timeout, Timer ID: TIMER_SS_CW_PLAY_SOUND_INTERVAL.
*Nov 20 03:10:05:296 2005 RouterA SS/7/VOICE:
CW_INFO: [0x00090003] Play Sound on CW pending state when
TIMER_SS_CW_PLAY_SOUND_INTERVAL out.
*Nov 20 03:10:05:447 2005 RouterA SS/7/VOICE:
CW_INFO: [0x00090003] Stop playing call waiting signal tone.
*Nov 20 03:10:05:598 2005 RouterA SS/7/VOICE:
CW_INFO: [0x00090003] Complete to control playing call waiting signal tone.
// The call waiting tones were played for the set times.
# Enable all types of debugging for call waiting on Router A.Output similar to the following example is
generated when the following conditions exist:
Telephone A, Telephone B, and Telephone C are attached to Router A, Router B, and Router C,
respectively.
Telephone A is enabled with call waiting.
Telephone B places a call to Telephone A that is conversation with Telephone C. Then, the user
Telephone A presses hookflash to answer the call from Telephone B.
<RouterA> debugging voice ss cw all
SS CW all debugging switches are on
<RouterA>
*Nov 20 05:29:41:288 2005 RouterA SS/7/VOICE:
CW_EVT: [0x000b0000] Receive CMC_INFORMATION message from SA module.
// A CMC_INFORMATION (HOOKFLASH) message was received.
*Nov 20 05:29:41:288 2005 RouterA SS/7/VOICE:
CW_EVT: [0x000b0000] Receive CMC_INFORMATION message from SA module in PENGING state.
// The CMC_INFORMATION message was processed in the pending state.
*Nov 20 05:29:41:288 2005 RouterA SS/7/VOICE:
CW_FSM: [0x000b0000] State changed from S_CW_PENGING to S_CW_MCH.
// The state of the CW module changed from pending to multi-call hold.
*Nov 20 05:29:41:295 2005 RouterA SS/7/VOICE:
CW_EVT: [0x000b0001] Receive CMC_SERVICE_ACK message from SA module.
// A CMC_SERIVCE_ACK message was received.
*Nov 20 05:29:41:296 2005 RouterA SS/7/VOICE:
261