HP Comware 5 Debug Manual Vol 1

CW_EVT: [0x000b0001] Receive CMC_SERVICE_ACK message from SA module in MCH state.
// The CMC_SERIVCE_ACK message was processed in the multi-call hold state.
*Nov 20 05:29:41:296 2005 RouterA SS/7/VOICE:
CW_INFO: [0x000b0001] Received CH_OK CMC message on CW MCH state.
// A CH_OK CMC message was received.
*Nov 20 05:29:41:296 2005 RouterA SS/7/VOICE:
CW_FSM: [0x000b0001] State changed from S_CW_MCH to S_CW_IDLE.
// The CW service ended, and the state changed to idle.
*Nov 20 05:29:41:296 2005 RouterA SS/7/VOICE:
CW_INFO: [0xffffffff] The CW CCB is deleted successfully.
// The CW CCB was blocked.
debugging voice ss dr
Use debugging voice ss dr to enable door opening control service debugging.
Use undo debugging voice ss dr to disable door opening control service debugging.
Syntax
debugging voice ss dr { all | error | info | timer }
undo debugging voice ss dr { all | error | info | timer }
Default
Door opening control service debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
all: Specifies all types of debugging for the door opening control service.
error: Specifies error debugging.
info: Specifies information debugging.
timer: Specifies timer debugging.
Usage guidelines
Ta b l e 13 5 describes output fields and messages for the debugging voice ss dr error command.
Table 135 Output from the debugging voice ss dr error command
Field
Description
Failed to create DR CCB
The door opening control service failed to
create the CCB.
262