HP Comware 5 Debug Manual Vol 1

Field
Description
It's not called party input password in Door-Relay service
This error information indicates that the
password was entered by the calling party.
However, in the door opening control service,
the password should be entered by the called
party.
Failed to send door-relay command to driver
The door opening control service failed to send
the door-relay command to the driver.
Ta b l e 136 describes output fields and messages for the debugging voice ss dr info command.
Table 136 Output from the debugging voice ss dr info command
Field
Description
The first password is not *, and invalid to Door-Relay
service
The password was invalid, because the first
character of the password was not an asterisk
(*).
Examples
# Enable all types of debugging for door opening control on Router A. Output similar to the following
example is generated when the following conditions exist:
Telephone A and Telephone B are both attached to Router A.
The door-relay password * 012 # command is configured on the voice subscriber line for Telephone
B.
The password * 012 # is entered on Telephone B after Telephone A establishes a call to Telephone B.
<RouterA> debugging voice ss dr all
<RouterA>
*Sep 28 14:48:24:811 2009 RouterA SS/7/VOICE:
DR_INFO: [0x00000001] Create a DR CCB.
// The CCB of the door opening control service was created.
*Sep 28 14:48:24:811 2009 RouterA SS/7/VOICE:
DR_TMR: [0x00000001] Timer created, Timer ID: TIMER_SS_DR_DIALINTERVAL, Timer length:
10000.
// The timer with the ID of TIMER_SS_DR_DIALINTERVAL and the length of 10000 was created.
*Sep 28 14:48:25:101 2009 RouterA SS/7/VOICE:
DR_TMR: [0x00000001] Timer deleted, Timer ID: TIMER_SS_DR_DIALINTERVAL.
// The timer with the ID of TIMER_SS_DR_DIALINTERVAL was deleted.
*Sep 28 14:48:25:051 2009 RouterA SS/7/VOICE:
DR_TMR: [0x00000001] Timer created, Timer ID: TIMER_SS_DR_DIALINTERVAL, Timer length:
10000.
*Sep 28 14:48:25:351 2009 RouterA SS/7/VOICE:
DR_TMR: [0x00000001] Timer deleted, Timer ID: TIMER_SS_DR_DIALINTERVAL.
263