HP Comware 5 Debug Manual Vol 1

Field
Description
Attach IPP CCB failed when proceed barge in service!
The FEATURE service failed to attach the IPP CCB in
the processing of the barge-in service.
The IPP CCB is null when proceed barge in service.
The IPP CCB was null in the processing of the barge-in
service.
The SIP CCB is null when proceed block barge in
service.
The SIP CCB was null in the processing of the
block-barge-in service.
Attach IPP CCB failed when proceed block barge in
service!
The FEATURE service failed to attach the IPP CCB in
the processing of the block-barge-in service.
Detach IPP CCB failed when proceed block barge in
service!
The FEATURE service failed to detach the IPP CCB in
the processing of the block-barge-in service.
The IPP CCB is null when proceed block barge in
service.
The IPP CCB was null in the processing of the
block-barge-in service.
Stop DTMF detect error.
The FEATURE service failed to disable DTMF
detection. In this case, digits could still be collected
after the match ended.
Failed to create play sound interval timer.
The FEATURE service failed to create an interval timer
for playing announcements.
Play signal tone error. The FEATURE service failed to play signal tones failed.
The IfIndex is invalid when received
service_ack(feature).
The interface index was invalid when a SERVICE_ACK
(feature) message was received.
Invalid leg type when receive CMC_ALERTING
message in SENDSRV state.
The call leg type was invalid when a CMC_ALERTING
message was received in the SENDSRV state.
Failed to create wait connect timer in SENDSRV state.
The FEATURE service failed to create the CONNECT
timer in the SENDSRV state.
Invalid leg type when receive CMC_CONNECT
message in SENDSRV state.
The call leg type was invalid when a
CMC_CONNECT message was received in the
SENDSRV state.
Failed to send reverse feature code when proceed
FT_WAITSRVACK timer message.
The FEATURE service failed to send a reverse feature
code in the processing of the FT_WAITSRVACK timer.
Failed to reverse feature code when proceed
FT_WAITSRVACK timer message.
The FEATURE service failed to reverse the feature code
in the processing of the FT_WAITSRVACK timer. In this
case, no reverse feature code was sent.
Failed to stop signal tone.
The FEATURE service failed to stop playing signal
tones.
Failed to send feature message from FT module in
PRERELEASE state.
The FEATURE service failed to send a FEATURE
message from the FT module in the pre-release state.
Can not find CMC CCB when create FT CCB.
No corresponding CMC CCB was found during the
creation of the FT CCB.
The FT service CCB in CMC CCB is existed when
create FT CCB.
The FT CCB associated with the CMC CCB already
existed before the creation of the FT CCB.
The call state is error when create FT CCB.
The call state was incorrect in the creation of the FT
CCB.
Allocate memory for FT service CCB failed when
create FT CCB.
The FEATURE service failed to allocate memory to the
FT CCB in creating the FT CCB.
266