HP Comware 5 Debug Manual Vol 1

Field
Description
Can not find cmc CCB when delete FT CCB. The FT CCB to be deleted could not be found.
Invalid leg in call out state when send service(feature)
message.
The leg parameter was invalid in the callout state
when a SERVICE (FEATURE) message was sent.
Failed to create brother leg when send feature
message.
The FEATURE service failed to create a brother leg
when a FEATURE message was sent.
Failed to create message table to brother leg when
send feature message.
The FEATURE service failed to create a message
triggering table for a brother leg when a FEATURE
message was sent.
Failed to get new talk path when send feature
message.
The FEATURE service failed to obtain a new talk path
when a FEATURE message was sent.
Failed to create wait service_ack timer when send
feature message.
The FEATURE service failed to create the
SERVICE_ACK timer when a FEATURE message was
sent.
Failed to block barge in when silent monitoring other
calling.
The FEATURE service failed to block barge-in when
silent monitoring was enabled.
Failed to get brother call leg when send feature
message.
The FEATURE service failed to obtain a brother leg
when a FEATURE message was sent.
The feature message send type is invalid when send
feature message.
The method for sending a FEATURE message was
invalid.
Ta b l e 13 8 describes output fields and messages for the debugging voice ss ft event command.
Table 138 Output from the debugging voice ss ft event command
Field
Description
Receive CMC_SERVICE message from SA module in
invalid FT CCB state.
A CMC_SERVICE message was received from the SA
module in the invalid FT CCB state.
Receive CMC_SERVICE_ACK message from SA
module in SENDSRV state.
A CMC_SERVICE_ACK message was received from
the SA module in the SENDSRV state.
Send CMC_SERVICE(Feature) message to CMC
module in IDLE state.
a CMC_SERVICE (FEATURE) message was sent to the
CMC module in the idle state.
Ta b l e 139 describes output fields and messages for the debugging voice ss ft fsm command.
Table 139 Output from the debugging voice ss ft fsm command
Field
Description
State changed from IDLE to SENDSRV. The state changed from idle to SENDSRV.
Ta b l e 14 0 describes output fields and messages for the debugging voice ss ft info command.
Table 140 Output from the debugging voice ss ft info command
Field
Description
Receive successful response of feature service.
A response to the FEATURE message was received,
which indicated that the FEATURE service was
successfully registered.
267