HP Comware 5 Debug Manual Vol 1

Field
Description
The result in SERVICE_ACK(Feature) message is "fail".
The result in the SERVICE_ACK (FEATURE) message
was fail.
The fail cause is "Unknown user".
The failure cause in the SERVICE_ACK message was
unknown user.
The fail cause is "9499".
The failure cause in the SERVICE_ACK message was
9499. This cause code was directly displayed
because it could not be parsed according to H3C's
documents.
Release call in SENDSRV state, the fail cause is "No
calls to supervise".
The call was released in the SENDSRV state. The
failure cause was no call to supervise.
Attach IPP CCB to IfIndex when proceed barge in
service.
The IPP CCB was attached to an interface in the
processing of the barge-in service.
Attach IPP CCB to IfIndex when proceed block barge
in service.
The IPP CCB to was attached an interface in the
processing of the block-barge-in service.
Detach IPP CCB from IfIndex when proceed block
barge in service.
The IPP CCB was detached from an interface in the
processing of the block-barge-in service.
Begin to play result sound. Announcing the result started.
Do not play signal tone.
No signal tones were played if a FEATURE_ACK
message was received during conversation.
Can not reverse the operation when received
CMC_RELEASE message in SENDSRV state.
A CMC_RELEASE message was received in the
SENDSRV state, and if the feature code could not be
reversed, the call was directly released.
Release call when received CMC_RELEASE message
in SENDSRV state.
A CMC_RELEASE message was received in the
SENDSRV state, and the call was released.
Send reverse feature code when proceed
FT_WAITSRVACK timer message.
A reverse feature code was sent in the processing of
the FT_WAITSRVACK timer.
Stop playing result sound. Announcing the result stopped.
Create a FT CCB. An FT CCB was created.
Release the service leg source when delete FT CCB.
Related leg resources were released in deleting the FT
CCB.
Delete FT CCB. The FT CCB was deleted.
The feature code in the CMC_SERVICE message is
"*465".
The feature code in the CMC_SERVICE message was
485.
Ta b l e 141 describes output fields and messages for the debugging voice ss ft timer command.
Table 141 Output from the debugging voice ss ft timer command
Field
Description
Timer created, TimerId : TIMER_SS_FT_WAITSRVACK,
Timer le
ngth : 20000.
A 20000-millisecond timer was created for a
SERVICE_ACK message.
Timer deleted, TimerId :
TIMER_SS_FT_WAITCONNECT.
The timer for a CONNECT message was deleted.
268