HP Comware 5 Debug Manual Vol 1

Default
Hunt group debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
all: Specifies all types of debugging for hunt group.
error: Specifies error debugging.
event: Specifies event debugging.
info: Specifies information debugging.
Usage guidelines
Ta b l e 142 describes output fields and messages for the debugging voice ss hg error command.
Table 142 Output from the debugging voice ss hg error command
Field
Description
The Leg parameter received is null. The pointer to the current leg was null.
The CCB parameter is null. The pointer to the CCB was null.
The brother leg is null. The pointer to the brother leg was null.
Failed to fill in the in leg setup information.
The hunt group module failed to update the call
leg information.
The message type parameter is illegal. The message type was invalid.
The call information table in CCB is invalid. The pointer to the call information table was null.
Failed to get call information table by index.
The hunt group module failed to obtain a call
information table by index.
Ta b l e 143 describes output fields and messages for the debugging voice ss hg event command.
Table 143 Output from the debugging voice ss hg event command
Field
Description
Receive CMC_RELEASE message from SA module.
A CMC_RELEASE message was received from
the SA module.
Ta b l e 14 4 describes output fields and messages for the debugging voice ss hg info command.
Table 144 Output from the debugging voice ss hg info command
Field
Description
Create a setup message and send it. A SETUP message was sent.
Receive message from in leg from SA. A message was received from the input leg.
The release cause is normal clearing. A NORMAL_CLEARING message was received.
The out leg is ps type. The output leg was a PS leg.
272