HP Comware 5 Debug Manual Vol 1

Field
Description
The matched service is execute type, so only check the
first affix number item.
An execution service was matched, and only the first
additional code in the template was checked.
Check the first affix number item when matched
feature service.
The first additional code was checked when a
FEATURE service was matched.
Succeed to match service when the template defines
an affix number item.
A service with an additional code was successfully
matched.
Match Successfully, the template defines two
compulsory affix number item.
A service with two additional codes was successfully
matched.
Match successfully in RECVCODE state, when
matched an optional affix item.
A service with optional additional codes was
successfully matched in the RECVCODE state.
Match successfully in RECVNUM state, when matched
an optional affix item.
A service with optional additional codes was
successfully matched in the RECVNUM state.
Match successfully, when the affix number is null and
the service state is RECVCODE.
A service without any additional code was
successfully matched in the RECVCODE state.
Enable call waiting service. The CW service was enabled.
Disable call waiting service. The CW service was disabled.
Enable call-forwarding unconditional service. The call forwarding unconditional (CFU) was enabled.
Enable call-forwarding on busy service.
The call forwarding on busy (CFB) service was
enabled.
Enable call-forwarding no reply service.
The call forwarding no reply (CFNR) was service
enabled.
Enable call-forwarding not available service.
The call forwarding not available service was
enabled.
Disable call-forwarding unconditional service.
The call forwarding unconditional (CFU) service was
disabled.
Disable call-forwarding on busy service.
The call forwarding on busy (CFB) service was
disabled.
Disable call-forwarding no reply service.
The call forwarding no reply (CFNR) service was
disabled.
Disable call-forwarding not available service.
The call forwarding not available service was
disabled.
Create a SM CCB. An SM CCB was created.
Delete the SM CCB. An SM CCB was created.
Send the feature code by SETUP message. A feature code was sent in a SETUP message.
Succeed to reverse code, the reverse Feature code is
"*465".
The feature code was successfully reversed, and the
reversed feature code was *465.
Ta b l e 155 describes output fields and messages for the debugging voice ss sm timer command.
287