HP Comware 5 Debug Manual Vol 1

Call-watch debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging call-watch event
Use debugging call-watch event to enable call-watch event debugging.
Use undo debugging call-watch event to disable call-watch event debugging.
Syntax
debugging call-watch event
undo debugging call-watch event
Default
Call-watch event debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Table 160 describes output fields and messages for the debugging call-watch event command.
Table 160 Output from the debugging call-watch event command
Field
Description
Call-Watch group group-number contains the
interface interface-type interface-number
Call-Watch group specified by the group-number
argument contained the monitoring rule that monitored a
local interface. The local interface is specified by the
interface-type interface-number argument.
interface-type interface-number link-protocol is state
The link-layer state of the interface was specified by the
state argument, which can be up or down.
Call-Watch group group-number from state1 to
state2
The state of the monitor group specified by the
group-number argument changed from state 1 to state 2.
controller ×× state change to Watch-Out
The state of the E1 or T1 interface changed to
Watch-Out.
controller ×× associate group group-number
The E1/T1 interface was associated with the monitor
group specified by group-number.
controller ×× state from No-Watch-Out to
Watch-Out
The state of the controller interface changed from
No-Watch-Out to Watch-Out.
298