HP Comware 5 Debug Manual Vol 1
00 25 00 04 00 00 00 01 20 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Pkt length: 77
// The device sent a CFD frame out of port Ethernet1/1. The value
25
in the beginning of the packet
indicates that the packet is a TST packet.
*0.92437364 Sysname CFD/7/Pkt :
Send CFD Packet via Port Ethernet 1/1:
00 2b 00 0c 00 00 00 2f 00 00 00 00 00 00 00 00 00
Pkt length: 17
// The device sent a CFD frame out of port Ethernet1/1. The value
2b
in the beginning of the packet
indicates that the packet is a LMM packet.
*0.96487912 Sysname CFD/7/Pkt :
Send CFD Packet via Port Ethernet 1/1:
00 2a 00 0c 00 00 00 2f 00 00 00 1f 00 00 00 1a 00
Pkt length: 17
// The device sent a CFD frame out of port Ethernet1/1. The value
2a
in the beginning of the packet
indicates that the packet is a LMR packet.
# Enable CFD on the device and configure the corresponding MD, MA, and MEP. Enable debugging for
CFD errors. Send packets carrying unknown TLVs to the configured MEP.
<Sysname> debugging cfd error
*0.99118462 Sysname CFD/8/Err:
LTM/LTR Packet error:Package have unknown TLV
// The LTM packets/LTR packets received by CFD contained unknown TLVs.
# Enable CFD on the device and configure the corresponding MD, MA, MP, and MEP. Enable
debugging for AIS. Enable AIS, and configure the AIS frame transmission level and period.
<Sysname> debugging cfd fsm ais
*0.99118462 Sysname CFD/7/Fsm:
SI: 1
MEP ID: 1001
State machine: AIS Prestate: IDLE Curstate: NO_RECEIVE
// The AIS state machine of CFD transited from the IDLE state to the NO_RECEIVE state.
# Enable CFD on the device and configure the corresponding MD, MA, MP, and MEP. Enable
debugging for the CFD CCI state machine. Enable the configured MEP, and enable CC on the MEP.
<Sysname> debugging cfd fsm cci
*0.99118462 Sysname CFD/8/Fsm:
Port: Ethernet1/1 SI:1 MEP:140
State machine:CCI Prestate:CCI_IDLE Curstate:CCI_WAITING
// The CFD CCI state machine transited from the CCI_IDLE state to the CCI_WAITING state.
# Enable CFD on the device and configure the corresponding MD, MA, MP, and MEP. Enable
debugging for the CFD MME state machine. The MEP on the device received the error CCM packets from
other devices.
<Sysname> debugging cfd fsm mme
*0.99118462 Sysname CFD/8/Fsm:
Port: Ethernet1/1 SI:1 MEP:140
State machine:MME Prestate:ERRCCM_NO_DEFECT Curstate:ERRCCM_DEFECT
306