HP Comware 5 Debug Manual Vol 1

Field
Description
DateLen Data length.
Content Parameter content.
Tab l e 176 describes output fields and messages for the debugging cluster state command.
Table 176 Output from the debugging cluster state command
Field
Description
ID Member ID.
Pre state The previous state.
State The current state.
Time Hold time of the current state.
Examples
# Enable cluster packet debugging.
<Sysname> debugging cluster packet
*0.93214687 h3c_0.Sysname CLST/8/Debug_Send_Pkt:
Sending cluster packet:
Clst-head :
Ver: 2 Mode: 0 PktTyte: 1
FrmNoFlag: 0 FrameNo: 0
CheckSumFlag : 1 CheckSumVal :47184
CmdFlag : 0 CmdRec: 0
SrcMac :00e0-fc58-c438
DstMac :00e0-fc00-5502,
Mgn_head :
MainCmd: 1 SubCmd: 1 DateLen: 36,
Content :
0-- 68 33 63 00 00 00 00 00
1-- 00 00 00 00 00 00 00 00
2-- 00 00 00 00 00 00 00 00
3-- 00 00 00 00 00 00 00 00
4-- 00 01 00 0
// The management device sent a packet cluster packet.
# Enable NTDP packet debugging.
<Sysname> debugging ntdp packet
*Apr 27 04:48:33:871 2000 Sysname NTDP/7/Debug_Send_Pkt:
Sending NTDP packet:TYPE-- Request TTL--3 Dest MAC--Multicast Snd Port--Ethernet1/1
Segment/Serial--00/00
// An NTDP topology collection request was sent.
*Apr 27 04:48:33:880 2000 Sysname NTDP/7/Debug_Rcv_Pkt:
Receiving NTDP packet: TYPE-- Reply TTL--3 Req/Rspn MAC--00e0-fc00-3333 Rcv
Port--Ethernet1/1 Segment/Serial--00/00
// An NTDP topology collection response was received.
313