HP Comware 5 Debug Manual Vol 1

Field
Description
PortIndex Port index.
PortName Port name.
SynSubCmd
Command word of the synchronization sub-packet:
• 0—Configures a read community.
• 1—Configures a write community.
• 2—Configures an SNMPv3 group name.
• 3—Creates or updates the MIB view that is shared by the
cluster.
• 4—Adds a user to the SNMPv3 group that is shared by the
cluster.
ulFlag
Undo flag:
• 0—Not to undo.
• 1—To undo.
ComName Community name.
ComView MIB view for the community name.
ComReadFlag
ComWriteFlag
GroupFlag
MibViewFlag
UsmUserFlag
Flags of the SNMP configuration synchronization results:
• 0x00—Configuration succeeded.
• 0x01—Configuration failed.
• 0xff—No change.
GroupName SNMPv3 group name.
GroupRView Read only MIB view accessible to the SNMP group.
GroupWView Write MIB view accessible to the SNMP group.
GroupNView
Notify MIB view for the SNMP group. The SNMP users in the
group can send traps only for the nodes in the notify MIB view.
AuthFlag
Flag of packet authentication and privacy:
• 1—Authentication, no privacy.
• 2—Authentication and privacy.
• 3—No authentication, no privacy.
MibViewName MIB view name.
MibViewTree ID of the MIB subtree for the MIB view.
IncludeFlag
Access privilege flag for the MIB subtree in the MIB view:
• 1—Included. All objects in the MIB subtree are accessible in
the MIB view.
• 2—Not included. None of the objects in the MIB subtree is
accessible in the MIB view.
SnmpName Name of the newly added SNMPv3 group user.
GroupName Name of the SNMPv3 group to which the new user was added.
AuthPass
Authentication password of the newly added SNMPv3 group
user.
PrivPass Privacy password of the newly added SNMPv3 group user.
315