HP Comware 5 Debug Manual Vol 1

Connection limit debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging connection-limit
Use debugging connection-limit to enable debugging for connection limit.
Use undo debugging connection-limit to disable debugging for connection limit.
Syntax
debugging connection-limit
undo debugging connection-limit
Default
Debugging for connection limit is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Tab l e 179 describes output fields and messages for the debugging connection-limit command.
Table 179 Output from the debugging connection-limit command
Field
Description
ConnLmt Query: Connection request from a user.
Protocol Protocol number.
SourceIp Source IP address.
DestinationIp Destination IP address.
Vpn MPLS VPN instance to which the source IP address belongs.
Policy Connection limit policy index.
Limit Connection limit rule index.
Stat-type
Connection statistics type:
• 1—Collects statistics by source address.
• 2—Collects statistics by destination address.
• 4—Collects statistics by service type.
• 7—Collects statistics by combination of source address, destination
address, and service type.
• 8—Collects statistics by source address and uses the global connection
limits (the default).
318