HP Comware 5 Debug Manual Vol 1

// There is one connection at present, and the number of connections has reached the upper limit.
No more connections are allowed.
•
Multi-core device:
# Enable connection limit debugging on the device. Output similar to the following example is
generated when TCP connections are set up between the source and the destination under the
following condition: Connection limit policy 0 with connection limit rule 0 is configured.
<Sysname> debugging connection-limit
*Jun 30 16:43:56:971 2008 Sysname DPCONNLMT/7/CONNLMT_ENABLE_LIMIT: The limit 0 is
enabled.
// Connection limit rule 0 was enabled.
*Jun 30 16:44:56:971 2008 Sysname DPCONNLMT/7/CONNLMT_MATCH_LIMIT:Matched limit:0.
// Connection limit rule 0 was matched.
320