HP Comware 5 Debug Manual Vol 1

COPS debugging commands
debugging cops client-type
Syntax
Centralized devices:
debugging cops client-type dot1x { all | error | event | packet }
undo debugging cops client-type dot1x [ all | error | event | packet ]
Distributed devices–Centralized IRF devices:
debugging cops client-type dot1x{ all | error | event | packet } [ slot slot-number ]
undo debugging cops client-type dot1x [ all | error | event | packet ] [ slot slot-number ]
Distributed IRF devices:
debugging cops client-type dot1x { all | error | event | packet } [ chassis chassis-number slot
slot-number ]
undo debugging cops client-type dot1x [ all | error | event | packet ] [ chassis chassis-number slot
slot-number ]
Default
Debugging for COPS is disabled.
Views
User view
Default command level
1: Monitor level
Parameters
client-type: Specifies debugging for client services.
dot1x: Specifies debugging for the 802.1X service.
all: Specifies all types of debugging for COPS.
error: Specifies debugging for errors.
event: Specifies debugging for events.
packet: Specifies debugging for packets.
slot slot-number: Specifies debugging for a card. The slot-number argument represents the number of the
slot that holds the card. (Distributed devices.)
slot slot-number: Specifies debugging for an IRF member device. The slot-number argument represents
the ID of the IRF member device in the IRF fabric. (Centralized IRF devices.)
chassis chassis-number slot slot-numer: Specifies debugging for a card in an IRF member device. The
chassis-number argument represents the ID of the IRF member device, and the slot-number argument
represents the number of the slot that holds the card. (Distributed IRF devices.)
323