HP Comware 5 Debug Manual Vol 1

Customizable IVR debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging voice ivr fes
Use debugging voice ivr fes to enable FES debugging in the IVR system.
Use undo debugging voice ivr fes to disable FES debugging in the IVR system.
Syntax
debugging voice ivr fes { all | error | event | fsm | info | timer }
undo debugging voice fes { all | error | event | fsm | info | timer }
Default
FES debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
all: Specifies all types of debugging for the flow execute system (FES).
error: Specifies error debugging.
event: Specifies event debugging.
fsm: Specifies finite state machine debugging.
info: Specifies information debugging.
timer: Specifies timer debugging.
Usage guidelines
Ta b l e 183 describes output fields and messages for the debugging voice ivr fes error command.
Table 183 Output from the debugging voice ivr fes error command
Field
Description
IVR Node is not service node. The current node was not a Service node.
The call number is null, LocalId = %d. No number was configured for the node.
Channel ready result is failure, CallId = %d. The IVR failed to open media channel.
Ta b l e 18 4 describes output fields and messages for the debugging voice ivr fes event command.
326