HP Comware 5 Debug Manual Vol 1

// The IVR system processed services in the Alerting state.
*Jun 27 12:05:15:686 2008 71_C IVRF/7/VOICE:
IVR_FES_Info: Receive message from SA module.
// The IVR_FES received a message from the SA module.
*Jun 27 12:05:15:687 2008 71_C IVRF/7/VOICE:
IVR_FES_Info: Connect state process.
// The IVR system processed services in the Connect state.
debugging voice ivr mps
Use debugging voice ivr mps to enable MPS debugging in the IVR system.
Use undo debugging voice ivr mps to disable MPS debugging in the IVR system.
Syntax
debugging voice ivr mps { all | error | event | timer }
undo debugging voice ivr mps { all | error | event | timer }
Default
MPS debugging is disabled.
Views
User view
Default command level
2: System level
Parameters
all: Specifies all types of debugging for the media play system (MPS).
error: Specifies error debugging.
event: Specifies event debugging.
timer: Specifies timer debugging.
Usage guidelines
Tab l e 187 describes output fields and messages for the debugging voice ivr mps error command.
Table 187 Output from the debugging voice ivr mps error command
Field
Description
Failed to get media play ID, MediaPlayId = %d.
The IVR failed to obtain the idle media play ID; the
obtained media play ID is xxx.
Failed to find PlayCB, IfIndex = %d.
The IVR failed to find the node in the play control
block; the FES module call ID is xxx.
Failed to calculate packet size, CodecType = %d
PacketPeriod = %d.
The IVR failed to calculate packet size: the codec type
is x, and the packetization period is xxx.
Failed to get filename by media ID, CodecType = %d
MediaID = %d.
The IVR failed to obtain the media resource file name
by using the media resource ID: the media resource ID
is xxx.
Ta b l e 18 8 describes output fields and messages for the debugging voice ivr mps event command.
332