HP Comware 5 Debug Manual Vol 1

CWMP (TR-069) debugging commands
The output description tables in this document only contain fields and messages that require an
explanation.
debugging cwmp all
Use debugging cwmp all to enable all types of debugging for CWMP.
Use undo debugging cwmp all to disable all CWMP debugging.
Syntax
debugging cwmp all
undo debugging cwmp all
Default
CWMP debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
This command might cause CWMP to generate a large amount of log messages. To ensure system
performance, use this command only when necessary and disable the command when you complete
debugging.
Examples
# Enable all types of CWMP debugging. When the ACS is power-cycled to send an unsolicited request
to the CPE, output similar to the following example is generated:
<Sysname> terminal debugging
<Sysname> terminal monitor
<Sysname> debugging cwmp all
*Aug 10 17:57:38:219 2007 Sysname CWMP/7/information:
information:Add request to queue. type = 1,value = 0x126bea70.
*Aug 10 17:57:39:203 2007 Sysname CWMP/7/DebugInfo:
information:Connecting to HTTP client succeeded.
// The device connected to the HTTP client successfully.
*Aug 10 17:57:39:203 2007 Sysname CWMP/7/DebugInfo:
information:Manufacturer: H3C .
// The vendor name of the CWMP device was displayed.
*Aug 10 17:57:39:203 2007 Sysname CWMP/7/DebugInfo:
information:The OUI of manufacturer is 000FE2.
// The OUI of the CWMP device was displayed.
*Aug 10 17:57:39:203 2007 Sysname CWMP/7/DebugInfo:
335