HP Comware 5 Debug Manual Vol 1

error:Failed to create CWMS queue.
// CWMP failed to create CWMS queue when CWMP was enabled.
*Aug 13 16:40:52:719 2007 Sysname CWMP/7/DebugInfo:
error:Failed to initialize CWMP task.
// CWMP failed to initialize the CWMP task.
*Aug 13 16:40:52:719 2007 Sysname CWMP/7/DebugInfo:
error:Failed to get queue length.
// CWMP failed to get queue length.
debugging cwmp information
Use debugging cwmp information to enable CWMP information debugging.
Use undo debugging cwmp information to disable CWMP information debugging.
Syntax
debugging cwmp information
undo debugging cwmp information
Default
CWMP information debugging is disabled.
Views
User view
Default command level
1: Monitor level
Examples
# Enable CWMP information debugging. When the CPE receives a device status query from the ACS,
output similar to the following example is generated:
<Sysname> terminal debugging
<Sysname> terminal monitor
<Sysname> debugging cwmp information
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp]
*Aug 13 15:56:56:797 2007 Sysname CWMP/7/DebugInfo:
information:Failed to get full name by CMO.
// CWMP failed to get node name according to CMO.
debugging cwmp packet receive
Use debugging cwmp packet receive to enable CWMP received packet debugging.
Use undo debugging cwmp packet receive to disable CWMP received packet debugging.
Syntax
debugging cwmp packet receive
undo debugging cwmp packet receive
340