HP Comware 5 Debug Manual Vol 1

Field
Description
AuthorType=author-type
Authorization type:
• 4—EXEC user authorization request.
• 5—VPDN user.
• 6—PPP user.
• 7—VLAN user.
AuthenMethod = method
Authentication method:
• 0—Not set.
• 1—None.
• 2—KRB5.
• 3—Line.
• 4—Enable.
• 5—Local.
• 6—Tacacsplus.
ArgNum = number Number of authorization request attributes.
Service=service
Service type:
• 0—None.
• 1—Login.
• 2—Password authentication.
• 3—PPP.
• 4—ARAP.
Protocol= protocol-type Protocol type: IP, VPDN, or LCP.
Acl=acl-number ACL number.
Timeout=time Timeout time.
AutoExec=command Automatic command after user login.
Address = ip-address IP address of the user.
AddressPool Address pool.
CallBackVerify= No authentication after dialup.
Callbackdialstring= Whether or not callback was enabled.
DNSAddress= Assigned DNS IP address corresponding to the PPP link.
sVpdnGroupNumber=number VPDN group of the tunnel.
TunnelType=tunnel-type Tunnel type.
NO.%lu IPAddress=ip-address IP address used to establish a tunnel.
TunnelID=tunnel-id Tunnel ID.
SourceIP=ip-address IP address of the accessing user.
HelloInterval=interval L2TP hello packet transmission interval.
NoSessionTimeout=timer
HWTACACS cleared the corresponding tunnel when the timer
timed out.
HiddenAVP=bool-value Whether or not the L2TP hidden function was enabled.
TosReflect=bool-value
Whether or not HWTACACS mapped the TOS field of the
original IP header when it created an L2TP external IP header.
33