HP Comware 5 Debug Manual Vol 1

User-service: example
Src-ip: 114.89.14.154
Dst-ip: 1.1.1.1
Src-port: 1024
Dst-port: 1025
Protocol: 6
// The Guard received a TCP packet for the user service example .
debugging ddos error
Use debugging ddos error to enable DDoS protection error debugging.
Use undo debugging ddos error to disable DDoS protection error debugging.
Syntax
debugging ddos error
undo debugging ddos error
Default
DDoS protection error debugging is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Tab le 193 describes output fields and messages for the debugging ddos error command.
Table 193 Output from the debugging ddos error command
Field
Description
Failed to create a drop_stat entry
(template-type/template-para) for
configuration synchronization.
The DDoS protection module failed to create a statistics entry for
discarded packets during configuration synchronization.
template-type: Template type, protocol (other protocol packet
template), udp, tcp, dns-udp, dns-tcp, fragments, icmp, and http.
template-para: Template parameter.
• For a TCP or UDP template, this parameter is used to generate a
TCP or UDP template object and is in the range of 1 to 65535
(port number).
• For a protocol template, this parameter is used to generate a
protocol template object and is in the range of 1 to 255 (protocol
number).
• For other templates, this parameter is invalid because each
template has the unique object.
Not enough resource to send netstream
packet
NetStream packets cannot be sent because of insufficient resources.
350