HP Comware 5 Debug Manual Vol 1

Rx, interface Vlan-interface1
Message type: request
Hardware type: 1, Hardware address length: 6
Hops: 1, Transaction ID: 2294688324
Seconds: 0, Broadcast flag: 0
Client IP address: 0.0.0.0 Your IP address: 0.0.0.0
Server IP address: 0.0.0.0 Relay agent IP address: 22.0.0.1
Client hardware address: 00e0-fc14-1601
Server host name: Not Configured, Boot file name: Not Configured
DHCP message type: DHCP Request
// The DHCP server received a DHCP-REQUEST message.
*0.279172 Sysname DHCPS/7/DHCPS_EVENT:
DHCPServer: Acknowledge the DHCPREQUEST message.
*0.279172 Sysname DHCPS/7/DHCPS_PACKET:
Tx, interface Vlan-interface1
Message type: reply
Hardware type: 1, Hardware address length: 6
Hops: 0, Transaction ID: 2294688324
Seconds: 0, Broadcast flag: 0
Client IP address: 0.0.0.0 Your IP address: 22.0.0.2
Server IP address: 0.0.0.0 Relay agent IP address: 22.0.0.1
Client hardware address: 00e0-fc14-1601
Server host name: Not Configured, Boot file name: Not Configured
DHCP message type: DHCP Ack
*0.279172 Sysname DHCPS/7/DHCPS_EVENT:
DhcpServer: Send DHCPACK to 00e0.fc14.1601-Vlan-interface2 Offer IP=> 22.0.0.2 via
22.0.0.1.
// The DHCP server sent a DHCP-ACK message.
debugging dhcp relay
Use debugging dhcp relay to enable DHCP relay agent debugging.
Use undo debugging dhcp relay to disable DHCP relay agent debugging.
Syntax
debugging dhcp relay { all | error | event | packet [ client mac mac-address ] }
undo debugging dhcp relay { all | error | event | packet [ client mac mac-address ] }
Default
DHCP relay agent debugging is disabled.
Views
User view
Default command level
1: Monitor level
357