HP Comware 5 Debug Manual Vol 1

Field
Description
TunnelAuthen=bool-value Whether or not tunnel authentication was enabled.
UDPCheckSum=bool-value Whether or not the L2TP UDP CheckSum function was enabled.
ucflag=flag-number Authentication result flag.
ServerMsg=msg Server message to login user.
Echo=number Username and password echo flag.
MutilinkMax Maximum number of aggregated links.
MutilinkCurrent Current number of aggregated links.
PacketIn Number of transmitted incoming packets upon an action.
ByteIn Number of transmitted incoming bytes upon an action.
PacketOut Number of transmitted outgoing packets upon an action.
ByteOut Number of transmitted outgoing bytes upon an action.
ElapsedTime Elapsed time since an action.
NasRxSpeed Maximum receive speed.
NasTxSpeed Maximum transmit speed.
AcctFlag =acct-flag
Accounting method:
• 1—Net (network).
• 2—Connet (connection).
• 3—Exec.
• 4—System.
• 5—Cmd.
AcctType =acct-type
Accounting type:
• 2—Start accounting.
• 4—End accounting.
• 8—Update accounting.
Status=status
Accounting result flag:
• 1—Success.
• 2—Failure.
• 3—No response.
• 4—Error.
Ta b l e 13 describes output fields and messages for the debugging hwtacacs receive-packet command.
Table 13 Output from the debugging hwtacacs receive-packet command
Field
Description
Status Authentication status.
Flag
Whether or not the entered username and password were displayed
in the authentication response.
server_msg len Length of the message sent from the server to the client.
data len Length of the failure causes received from the server.
server_msg Server message to the login user.
34