HP Comware 5 Debug Manual Vol 1

Field
Description
data Failure causes returned from the server.
arg_cnt Number of authorization attributes.
arg mm len Length of the attribute pair.
arg Attribute pair.
Ta b l e 14 describes output fields and messages for the debugging hwtacacs send-packet command.
Table 14 Output from the debugging hwtacacs send-packet command
Field
Description
version Version number.
type Packet type.
seq_no Session packet.
session_id Session ID.
length Packet body length, excluding the packet header.
packet body is error Packet body error.
action Action to be taken.
priv_lvl User privilege level.
user len Username length.
port len Port name length.
rem_addr len User address length.
data len Length of the failure causes received from the server.
rem_addr IP address of the user.
Data Failure causes returned from the server.
user_msg len Length of the character string entered by the user.
data len Length of the data indicating specific information of access action (such as exit).
flag
Accounting status in accounting request or user action in the authentication-continue
packet.
user_msg Character string entered by the user.
data Specific information of access action (such as exit).
authen_method User authentication method.
authen_service Authentication service type.
arg_cnt Number of authorization attributes.
arg mm len Length of the attribute pair.
arg Attribute pair.
Examples
The output in the following examples was created when a Telnet user logged into and out of the device
configured with HWTACACS.
35