HP Comware 5 Debug Manual Vol 1

Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all DHCPv6 server debugging.
error: Specifies DHCPv6 server error debugging.
event: Specifies DHCPv6 server event debugging.
packet: Specifies DHCPv6 server packet debugging.
verbose: Specifies Detailed DHCPv6 packet debugging information.
Usage guidelines
Tab l e 198 describes output fields and messages for the debugging ipv6 dhcp server error command.
Table 198 Output from the debugging ipv6 dhcp server error command
Field
Description
Invalid Confirm message,
option status:
Auth = Auth, ClientID = ClientID, ServerID = ServerID.
Option values:
• 1—The option is available.
• 0—The option is not available.
Invalid Decline message,
option status:
Auth = Auth, ClientID = ClientID, ServerID = ServerID.
Option values:
• 1—The option is available.
• 0—The option is not available.
Tab l e 199 describes output fields and messages for the debugging ipv6 dhcp server event command.
Table 199 Output from the debugging ipv6 dhcp server event command
Field
Description
Step n: step-description.
Interface name: Interface-name
Result: result-description
Current IP: ipv6-address
Steps for assigning IPv6 addresses to clients:
1. Search in statically bound addresses.
2. Search with hint in allocated addresses.
3. Search without hint in allocated addresses.
4. Search with hint in free addresses.
5. Search in timed out addresses.
6. Search in conflicted addresses.
Interface name specifies the interface of receiving Solicit messages.
Result indicates the IPv6 address search result:
• Found.
• Not found.
• Error occurred.
Current IP indicates the found IP address. If no IP address is found,
this field is not displayed.
374