HP Comware 5 Debug Manual Vol 1
Table 202 Output from the debugging dldp error command
Field
Description
Reason types of error
packet
Types of error DLDP packets:
• DLDP NOT ENABLE—DLDP is not enabled.
• CURRENT STATE CANN'T RECEIVE PACKET—A port in the current DLDP state
cannot receive packets.
• PROTOCOL ID ERROR—The protocol ID of the packet is invalid.
• VERSION ID ERROR—The version ID of the packet is invalid.
• INTERVAL ERROR—The interval for sending Advertisement packets carried in the
packet is invalid.
• AUTHTYPE ERROR—The authentication type of the packet is invalid.
• PASSWORD ERROR—The authentication password of the packet is invalid.
• PACKET TYPE ERROR—The packet type is invalid.
Table 203 describes output fields and messages for the debugging dldp neighbor command.
Table 203 Output from the debugging dldp neighbor command
Field
Description
Neighbor State
Neighbor state:
• UNIDIRECTIONAL—The neighbor is in the unidirectional state.
• BIDIRECTIONAL—The neighbor is in the bidirectional state.
• UNKNOWN—The state of the neighbor is unknown.
RSY Flag
RSY flag of the neighbor, including:
• NO_RSY—The RSY flag is 0.
• RSY—The RSY flag i s 1.
AgedTime Aging time of a neighbor entry.
EchoTime Echo timeout time of a neighbor.
Neighbor State
Transition : state1 -->
state2
A neighbor transited from state1 to state 2. (A neighbor can be in unidirectional
state, bidirectional state, and unknown state.)
Table 204 describes output fields and messages for the debugging dldp packet command.
Table 204 Output from the debugging dldp packet command
Field
Description
DLDP ID Protocol ID carried in packets.
DLDP Version ID DLDP version ID carried in the packet.
385