HP Comware 5 Debug Manual Vol 1

upstream: Specifies packets sent from the local SNA device.
receive: Specifies packets received from the specified remote DLSw router or all remote DLSw routers.
send: Specifies packets sent to the specified remote DLSw router or all remote DLSw routers.
remote: Debugging for the specified remote peer or all remote peers.
ip-address: IP address of the remote peer.
Usage guidelines
Table 206 describes output fields and messages for the debugging dlsw circuit command.
Table 206 Output from the debugging dlsw circuit command
Field
Description
Circuit circuit-id Identifier of the DLSw virtual circuit.
Event State machine event of the DLSw virtual circuit.
State
State transition of the state machine of the DLSw virtual
circuit.
Action
Action taken by the DLSw virtual circuit state machine
for the event.
Table 207 describes output fields and messages for the debugging dlsw reachable-cache command.
Table 207 Output from the debugging dlsw reachable-cache command
Field
Description
Event DLSw reachability event.
State
State transition of the DLSw reachability information
entry.
Action
Action taken, such as sending an explorer frame or
sending an acknowledgment.
Table 208 describes output fields and messages for the debugging dlsw dlc error command.
Table 208 Output from the debugging dlsw dlc error command
Field
Description
Error
An error that occurred in the DLC sub-module. This
error can be a module-level error, such as failure of
finding the DLSw virtual circuit for a packet, or a
system-level error, such as memory request failure.
Table 209 describes output fields and messages for the debugging dlsw dlc packet command.
Table 209 Output from the debugging dlsw dlc packet command
Field
Description
Packet Upstream/Downstream Packet direction.
Packet Len = length Packet length.
Partial data Part of the packet data.
389