HP Comware 5 Debug Manual Vol 1
*0.2441120 Sysname DLSW/7/DLSw_DLC:
DLSw_DLC Packet Upstream, Packet Len = 60, Partial data as follows:
080439e0 00 00 17 38 6d fd 00 20 35 7b e0 65 00 03 04 04
080439f0 7f 02 f5 60 01 e5 f5 a0 00 00 00 7a 00 00 00 00
08043a00 01 e5 f5 70 01 d9 8f c0 00 0c 09 84 01 e5 f5 50
08043a10 00 00 00 2c e1 e5 f0 01 01 e5 f5 94
*0.2441520 Sysname DLSW/7/DLSw_CIR:
DLSW FSM, Circuit ce000a:
Event DLC_CONTACTED_SABME
State CIRCUIT_ESTABLISHED --> CONNECT_PENDING.
Action SSP_TYPE_CONTACT.
*0.2441720 Sysname DLSW/7/DLSw_TCP:
DLSw_PACKET 1.1.1.2 ( TCP Output)
*0.2441920 Sysname DLSW/7/DLSw_SSP:
080439a9 31 48 00 00 00 ce 00 0a 00 0f 00 00 00 00 08 40
080439b9 42 01 00 00 88 00 00 08 00 20 35 7b e0 65 00 00
080439c9 17 38 6d fd 04 04 02 00 00 00 00 00 00 0f 00 00
080439d9 00 ce 00 0a 00 00 00 00 00 0f 00 00 00 ce 00 0a
080439e9 00 00 00 00 00 00 00 00
*0.2441920 Sysname DLSW/7/DLSw_TCP:
DLSw_TCP 1.1.1.2: send whole packet, len=72
// The XID packets exchange process is complete. The SNA host initiated a SAMBE packet to request for
connection setup. The state of circuit ce000a transited from CIRCUIT_ESTABLISHED to
CONNECT_PENDING. The SAMBE packet was encapsulated in an SSP frame, which was sent to the
remote DLSw router via the TCP connection.
*0.2442520 Sysname DLSW/7/DLSw_TCP:
DLSw_TCP 1.1.1.2: recv a whole packet, len=72
*0.2442730 Sysname DLSW/7/DLSw_TCP:
DLSw_PACKET 1.1.1.2 ( TCP Input)
*0.2443130 Sysname DLSW/7/DLSw_SSP:
0833f443 31 48 00 00 00 ce 00 0a 00 0f 00 00 00 00 09 00
0833f453 42 01 00 00 88 00 00 09 00 20 35 7b e0 65 00 00
0833f463 17 38 6d fd 04 04 01 00 00 00 00 00 00 0f 00 00
0833f473 00 ce 00 0a 00 00 00 00 00 0f 00 00 00 ce 00 0a
0833f483 00 00 00 00 00 00 00 00
*0.2443330 Sysname DLSW/7/DLSw_DLC:
DLSw_DLC Packet Downstream, Packet Len = 17, Partial data as follows:
0833f47a 00 20 35 7b e0 65 00 00 17 38 6d fd 00 03 04 05
0833f48a 73
*0.2443730 Sysname DLSW/7/DLSw_CIR:
Circuit ce000a repeat the current receive window.
*0.2443930 Sysname DLSW/7/DLSw_CIR:
DLSW FSM, Circuit ce000a:
Event RCV_CONTACTED_UA
State CONNECT_PENDING --> CONNECTED.
Action LLC2_CTRL_UA_RSP.
// The device received a UA packet from the remote router, which means that the SNA terminal
connected with the remote router has accepted the connection setup request. The state of circuit ce000a
402